Characteristics of machine tool:
1 the machine frame is welded by steel plate, and the stress is eliminated by vibration aging to prevent the deformation of the machine body.
2 the machine is equipped with Japanese MITSUBISHI CNC system, accurate positioning accuracy.
3 all adopt AC servo motor drive, can avoid cleaning brush work, maintenance free.
4 high precision ball screw drive and servo motor drive, high speed and high torque are achieved in Taiwan.
Hydraulic clamp and hydraulic pressure plate using the 5 independent machine, ensure the gouging workpiece firmly, high stability.
Width of working plate
Processing board length
Cut in speed
X shaft turret maximum stroke
Three thousand and two hundred
X axis servo motor power
Three point five
One thousand and one hundred
(1) CNC system: Japanese MITSUBISHI original system
(2) hydraulic system: hydraulic system of the United States.
(3) linear guide rail: Taiwan on silver
(4) ball screw: Taiwan Silver
(5) servo motor: MITSUBISHI, Japan
(6) electrical part: Schneider, France
(7) plane slot cutter: imported from Sweden
(8) with the arm 4
(9) working lighting
numerical control system
MITSUBISHI CNC system
1 control axis number: 3 axis (X, Y, Z axis)
2 display color: flat color display (640*400 dot matrix)
3 input mode: touch control, dialogue mode input
4 driving mode: using digital AC servo motor
5 position detection: using absolute position encoder
6 absolute / incremental programming
7 metric conversion
8 minimum setting unit: 0.01mm
9 data input: MDI input processing data, simple and quick. As long as the user input number, plate thickness, plate length, V groove depth, the time the amount of feed, automatic calculation and processing.
10 number of stored procedures: 128 (about 6000 steps)
11. Set a number of slots: number is between 1-50, once in a fixture in planing cutting up to 10 of the same depth of the pit; workpiece number for 51-60, in sheet metal planing 20 different depth of groove; workpiece number 81 - 90 can planing 50 at the same depth of the pit.
12 program capacity: 256KB
13 working temperature: 0 C -45
14 room temperature: -60 C -30 C
15 after the block material (Y axis) repeat positioning accuracy: +/-0.05mm